Generally speaking, when using the equipment, pay attention to the equipment. After each piece of equipment has been used for a long time, the internal parts often have various problems, so we use in addition to the process. In addition to being concerned, it is necessary to properly maintain the equipment.

The cooling tower we often say is also very important. The material of the cooling tower is generally made of carbon steel and stainless steel. For the anti-corrosion title of the cooling tower, the general method is usually based on welding repair. The method, but in the process of welding repair, internal stress will occur inside the tube sheet, which will cause leakage of the cooling tower tube sheet again.

We often say that the cooling tower in the process of production, often pay attention to many problems, when the tube and tube welding is generally carried out by means of manual arc welding, when we carry out the welding of the FRP cooling tower, its shape There are different degrees of shortcomings that we often encounter during the welding process.

In the process of welding, it will cause sag, as well as pores, slag inclusions, etc., the three steps of welding ability become quite uneven. When the tube sheet is in contact with industrial cold water, the impurities and salts in industrial water are used. , gas microbes, etc., have different degrees of influence on the welding of tube sheets.

It is often said that industrial water, whether it is sea water or fresh water, has a certain effect on the metal in the maintenance of the cooling tower. Therefore, we should pay special attention to the maintenance of the cooling tower.